Data Center Power & Energy Storage Solution

Data centers cannot tolerate even milliseconds of power loss. XGW's data center power solution spans the full DC power chain: 48V LiFePO4 rack batteries with 6,000+ cycles for edge facilities, high-voltage UPS battery strings (192V/384V/409V) for central UPS systems, DIN rail PSUs with DC-OK signaling for rack-level control power, and enclosed PSUs for server and networking equipment. Smart BMS telemetry over RS485/CAN integrates with DCIM platforms for real-time battery health monitoring.

Core Components

How It Works

1. 48V rack-level backup. LiFePO4 telecom batteries (50-200Ah) drop into 19-inch racks for edge data centers and distributed IT rooms. 6,000+ cycle life at 80% DoD means 10-15 years of service — matching server refresh cycles and eliminating mid-life battery replacement.
2. Central UPS string replacement. High-voltage LiFePO4 UPS strings (192V/384V/409V) replace VRLA in central UPS systems with 3-4x cycle life, 1/3 the volume and 1/2 the weight. Active balancing BMS with CAN/RS485 interfaces reports SOC, SOH and alarm states to the UPS host and DCIM platform.
3. Rack control power with redundancy. DIN rail PSUs deliver clean 24V/48V for rack-level controllers, sensors and management modules. DC-OK relay contacts convert silent power failures into logged alarms. N+1 parallel redundancy ensures no single point of failure in control voltage.
4. Thermal and efficiency management. Enclosed PSUs up to 94% efficiency minimize heat load on data center cooling. Fanless convection models suit noise-sensitive edge deployments. -30C to +70C operation covers unmanned and outdoor cabinet installations.
5. DCIM integration. Smart BMS telemetry (RS485/CAN/Modbus) feeds battery voltage, current, SOC, SOH and cell temperature data directly into DCIM and BMS monitoring platforms — enabling predictive maintenance and capacity planning from real data, not estimates.