Emergency Lighting Case Studies

Real emergency-lighting deployments built on our self-contained emergency LED drivers with LiFePO4 batteries and a 2-hour emergency duration — EN 1838 / IEC 60598-2-22 compliant. The luminaire keeps an emergency light on mains failure, with no separate backup fitting and automatic recovery when power returns.

Deployments

UFO High Bay — Work Areas (Chile)

A self-contained emergency LED driver with a LiFePO4 pack added to 200W UFO high bays in Chilean work areas. On mains failure the luminaire drops to ~20% output and stays lit for 2 hours for safe evacuation and continued low-light work.

UFO High Bay · 20% dim · 2 h LiFePO4

UFO High Bay — Factory Floor (South Africa)

200W UFO high bays across a South African factory floor fitted with self-contained emergency drivers and LiFePO4 packs. On grid outage the luminaire drops to ~20% output and stays lit for 2 hours for safe movement and low-light work.

UFO High Bay · 20% dim · 2 h LiFePO4

LED Panel & Downlight (Italy)

Compact self-contained emergency LED drivers with LiFePO4 packs fitted inside LED panel lights and downlights across Italian commercial and interior projects — CE, EN 1838 compliant, 2-hour emergency duration.

Panel · Downlight · CE · 2 h LiFePO4

How we deploy emergency lighting

Self-contained driver. The emergency function lives inside the luminaire's existing driver, so no central battery system and no separate emergency fitting are needed.
LiFePO4 battery, 2-hour emergency duration. These deployments run on lithium iron phosphate packs sized to each luminaire's emergency load for a full 2 hours, with margin — chosen over NiCd for cycle life, no memory effect and far lower routine maintenance.
Specified emergency level. Output is matched to the site — from a dimmed high bay (about 20% of normal on the Chilean 200W UFO units) to a panel or downlight at its emergency level.
Automatic recovery. On mains return the driver recharges the LiFePO4 pack and restores normal operation with no manual reset.
Standards. Built to EN 1838 / IEC 60598-2-22; CE marked for the EU market, with IEC / SANS alignment for South Africa.

View Emergency LED Drivers

Have a similar project?

37 senior R&D engineers. OEM/ODM from 500 units. Samples in 3-7 days.

Get a Quote WhatsApp Us