What Is an Online Double-Conversion UPS?
An online double-conversion UPS regenerates its output: AC comes in, is rectified to DC, and a fresh AC waveform is rebuilt by the inverter - continuously, not only when the grid fails. The load never sees the utility waveform at all, so sags, spikes and frequency drift stop existing as events. Every UPS XGW manufactures - from the 1-40 kVA rack units to Modular Three-Phase UPS frames up to 720 kVA - is online double conversion.
Why transfer time is the number that matters
Line-interactive units pass utility power through an AVR tap-changer and only switch to battery when voltage leaves a window: a 2-10 ms gap, repeated on every sag. That is fine for a desktop. It is not fine for a PLC that resets on a 4 ms dip, a VFD that trips on DC-bus ripple, or imaging equipment mid-scan. Online topology has no gap to argue about - the inverter carries the load 100% of the time.
The classification to demand in tenders
IEC 62040-3 labels online double-conversion units as VFI (Voltage and Frequency Independent). Line-interactive lands in VI, passive units in SSD. Specifying "VFI-SS-11" in a tender locks in the topology without ambiguity - and excludes the cheaper units that fail the first deep sag.
What double conversion buys you beyond the battery
- Input PF > 0.99 and THDi < 3% on XGW modules - upstream generators and feeders stay clean.
- Output PF = 1, THDu < 1% - safe for medical and automation loads.
- Frequency stability for loads tied to local gensets or weak island grids.
- Battery events shrink to real outages, not grid noise - which is what makes a UPS lithium battery last its full cycle life.
The efficiency objection, answered
Double conversion burns a few points more than line-interactive; modern frames run 94-97%. Eco-mode modes recover some of that by bypassing the converter - but they reintroduce the transfer gap you paid to eliminate. For critical loads, take the efficiency delta and buy the right battery chemistry instead: a LiFePO4 string holds voltage through short events that a VRLA string ages on.
Line-interactive still has a place - desktops, printers, non-critical terminals. For anything that costs money when it trips, specify online. XGW's Industrial & Tower UPS (120-600 kVA tower, 1-40 kVA rack) and modular lines are all VFI; request the IEC 62040-3 classification sheet with any quote.
Frequently Asked Questions
What is the transfer time of an online double-conversion UPS?
Zero. The inverter carries the load continuously, so there is no transfer at all. Line-interactive units switch to battery in 2-10 milliseconds - fast enough for desktops, marginal for PLCs, medical imaging and VFDs.
What does VFI mean in UPS classification?
VFI (Output Voltage and Frequency Independent) is the IEC 62040-3 classification for online double-conversion UPS: the output is regenerated by the inverter and does not follow input disturbances.
Does an online UPS waste more energy than a line-interactive unit?
Modern online UPS run 94-97% efficient, and the delta versus line-interactive is a few points. Eco-mode recovers some loss but reintroduces transfer risk - most critical loads stay in full double conversion.
Does my load actually need online topology?
If the load is a PLC, RTU, medical device, server, VFD or anything with a power supply that trips on sags, yes. Desktop PCs and printers tolerate line-interactive.