Fiber & Network Power Solutions

Power the last mile. XGW designs and manufactures the adapters, PoE units and backup batteries that keep ONU, ONT, routers, CPE, set-top boxes and subscriber equipment online, from the cabinet to the customer premise.

Power for every network node

Passive optical networks, fiber-to-the-home and fixed-wireless rollouts all share one problem: the active electronics at each node need clean, certified, always-on power. XGW covers the full chain, from a 5W wall adapter to a 48V LiFePO4 backup battery for the cabinet.

ONU / ONT12V adapters, barrel or USB-C, interchangeable AC plugs for global SKUs.
Router / Modem12V and 24V supplies, Level VI efficiency, no-load <0.075W.
CPE / Fixed wirelessOutdoor-rated adapters and PoE for rooftop and pole units.
Set-top box5V/12V low-power adapters, custom connectors, private-label.
Subscriber equipmentOEM power for the devices your customers install on premise.
UPS backupShort ride-through to 48V LiFePO4 string for the whole node.

Related products

Network & CPE Power Adapter

12V/24V adapters built for ONU, routers and CPE with interchangeable plugs and custom connectors.

View product →

Wall Mount Power Adapter

5-60W, UL/CE/PSE/SAA certified, Level VI, MOQ from 1,000 units for OEM.

View product →

Desktop Power Adapter

Higher-wattage adapters for CPE and set-top boxes needing more headroom.

View product →

48V Telecom Battery

LiFePO4 backup for cabinets and node sites, RS485/CAN/SNMP, 6,000+ cycles.

View product →

UPS Battery

48V to 409V lithium strings that drop into existing UPS with matched BMS protocol.

View product →

IoT & Network Equipment Power

The broader solution: routers, 5G CPE, IoT gateways, PoE and UPS backup.

View solution →

Frequently asked questions

What power adapter do I need for an ONU or ONT?

Most ONU and ONT units use a 12V DC adapter in the 0.5A-2A range, with a barrel or USB-C connector. Confirm the voltage, polarity and plug size printed on the original PSU; XGW supplies interchangeable-plug 12V adapters for global shipment and custom connectors for OEM builds.

Can one power adapter serve a router, CPE and set-top box together?

Only if their voltage and polarity match. Routers and CPE commonly use 12V; some set-top boxes use 12V or 5V. A single multi-output or higher-current 12V supply can feed several same-voltage devices through a splitter, but never mix 5V and 12V loads on one supply.

Do network devices need UPS backup?

For any always-on service, yes. A short ride-through keeps routers, ONT and CPE online through grid blips; for longer outages, pair the DC power chain with a 48V LiFePO4 telecom battery so the whole subscriber premise stays up. XGW builds both the adapters and the backup battery.

What certifications should a network power adapter carry?

UL, CE, CB, PSE, SAA and RoHS for safety and market access, plus Level VI / EU 2019/1782 efficiency for standby power. XGW adapters are certified to these standards and support private-label packaging for OEMs.

Read the guide: How to choose a power adapter for a router →  ยท  Case study: set-top box adapter for Mexico & Brazil →

Specify the right power for your network

Send your node voltage, connector and certification requirements, or ask for OEM private-label adapters and backup batteries.

Request a quote Download catalogues